Molybdenum mesh, also known as molybdenum wire mesh is made of pure molybdenum wire weaving, the main specifications are as follows:
Material: pure molybdenum wire and molybdenum lanthanum alloy.
Content: pure molybdenum content ≥ 99.95%, molybdenum lanthanum alloy lanthanum content of 0.3%.
Process: plain weave.
Aperture: 0.02mm-50mm (filtration accuracy).
Spot specifications: 4 mesh, 20 mesh, 24 mesh, 40 mesh, 100 mesh, 200 mesh, 250 mesh.
Shape classification: can be cut according to actual needs for the round, rectangular, oval and so on.
Applications: vacuum furnace heat treatment molybdenum net, vacuum furnace grille, strong magnetic sintering.
Applicable temperature: 1100 ℃
Work: continuous work
Variety of products: Molybdenum mesh in the vacuum furnace heat treatment, the use of automatic sintering device, each completed a number of strong magnetic sintering, molybdenum net need to take out with sintered, resulting in oxidation, black molybdenum mesh surface containing graphite milk coating, Protect the molybdenum wire substrate to slow down the oxidation rate, thereby improving the service life.
Improve the process: molybdenum mesh is mainly due to the edge of the oxidation caused by scraping scrap, so the Molybdenum mesh in the edge of the use of double-wire weaving to improve the edge of molybdenum wire mesh can also improve the life of Molybdenum mesh. According to the actual production needs, the edge of the molybdenum mesh can be wrapped with molybdenum foil edge, both to solve the edge of the molybdenum mesh edge of the problem can facilitate the operation and can improve the number of products used, thereby reducing the use of cost.