One of our specialties is fabricating cylindrical parts from wire cloth, perforated metal, and expanded metal.
The most cost effective method of fabrication is to resistance weld the seam overlap.
We also solder and braze seam overlaps when required, and in some instances roll to a butt seam.
If you need one end of the cylinder closed, we offer several different end closure configurations.
See our End Closures page for design options.
See our Weaves page if you are unfamiliar with woven wire cloth terminology.
Plain and square weave wire materials provide the highest open area percentage, and therefore the highest flow rate and least flow resistance.
However, in the finer materials with higher mesh counts, the material without reinforcement may be too delicate for certain applications.
Options in these instances are using a single layer of Dutch weave material, or using a reinforcing layer of heavier plain weave wire or perforated metal to provide strength along with a finer mesh layer that provides the desired filtration characteristics.
Multi-layer sintered wire cloth laminates may also be used to provide the filtration characteristics of a finer mesh with the strength of courser materials.